Water Boot with high electrical resistance sole> 2,000 MOhm, the minimum requirement in ISO 20345: 2011> 1.000Mohm
18,000 V / min in dry places, with a leakage current of 0.25 mA, the minimum requirement CAN / CSA Z 195-09 <1.00 mA
Add a number of secondary protection devices to be added to the mandatory protections:
100% free of metal to electrically isolate. Lightweight and nonmagnetic, is a dual boot that guarantees lightness and density thermal insulation particularly high. The template antiperforación tissue and toe protection composite toes do even more comfortable and lightweight. The design of the sole at the toe and at the heel ensures maximum resistance to slippage also in waste land.
Reed COLD DEFENDER PU (*) resistant -25
COLD DEFENDER PU outsole (*) resistant -25 with high electrical resistance
(*) COLD DEFENDER PU is a special blend of polyurethane that ensures high performance compared to the normal polyurethane. MECHANICAL RESISTANCE TO LOW TEMPERATURES: very resistant and high dynamic conditions in response to mechanical demands in various jobs, resistant to extreme temperatures up to -25 ° C.
-Isolation THERMAL proper shoemaking overcomes Cold Insulation test with values higher than -17 ° C required by EN ISO 20345: 2011
Template METATARSAL SUPPORT, perfumed PU, soft, anatomical, entire, removable, covered with cloth, ensuring comfort and absorbs the impact energy of the ground. It insulates against cold and heat. Template scented.
TOP RETURN toe nonmetallic
Template Antiperforant not metàl.lica APT Plate - Zero Perforation with high electrical resistance
SRC Slip Resistance (SRA + SRB), verified by coefficients greater rate than those requested in ceramic flooring + detergent solution (SRA) and steel + glycerin (SRB)
Shock Absorber> 30 Joules, exceeding ISO 20345: 2011> 20