Outer Sole made from Antistatic Polyurethane / TPU directly injected in the upper TPU, 3 colours, slipping resistant, abrasion resistant and hydrocarbons resistant.
Plus points Footwear completely free from metal parts. SOFT-BED GEL PLUS footbed, anatomic, made of scented PU, antibacterial, soft and comfortable. The wide gel insert in the heel area absorbs the shock impact. Outsole TPU 3 colours, resistant to flexions up to -25°C. The special design of the outsole was studied to provide maximum foot support. TPU toe cap protection, resistant to scratches and abrasion.
100% Metal Free
Width 11 Mondopoint
Safety Rating S3 WR HRO SRC
SIZES 6-12 39-47
These Cofra Boots have a Gore-Tex, Membrane it is made of 1.4 billion pours per cm2 granting waterproofness and high breathability Gore-Tex, Membrane protects against bacteria and resists high temperatures.
These Cofra boots have a Top return Composite Toe Cap resistant to 200j, they are non magnetic, and are great in security areas where metal detectors are used, they also have a reduced thickness and thermal insulting properties when compared to steel, their main purpose is to resist against impact 200j from +60deg C - to -40deg C, and are Lighter being only 50gr compared to 90gr for steel toe caps.
The APT Plate is lighter than steel being only 50 gr compared to 65gr for steel, the APT midsole also offers a better thermal insulation compared to steel midsoled boots, the APT midsole offers a better surface area protected than a steel midsole would.
This Cofra boot has a Soft-Bed footbed insole which is soft and comfortable polyurethane; the patters of the lower layer guarentees shock absorbing action and good grip, the upper absorbs perspiration and leaves the foot always dry.
Slip Resistance In Detail
SRA : ceramic + detergent solution – flat 0,44 0,32
SRA : ceramic + detergent solution – heel (contact angle 7°) 0,39 0,28
SRB : steel + glycerol – flat 0,21 0,18
SRB : steel + glycerol – heel (contact angle 7°) 0,18 0,13
Suggested uses Engineering jobs, building industry, maintenance jobs.
Care and maintenance Clean after each use and dry off away from direct heat; treat the leather with a suitable shoe-polish. Avoid contact with aggressive chemicals or extreme temperature. Avoid immersion in sea water, lime water or cement mixed with water.
Español
Català
Français
