FACIAL PROTECTORS (Pack 10 uts.)

DESCRIPTION OF THE PROTECTOR THE VISION OF FACE PROTECTION
This kit is designed to provide a protective barrier for the facial area and related mucous membranes (eyes, nose, lips), from splashes, sprays and splashes of body fluids. Although the World Health Organization in its "Situation Report - 66" of 03-26-2020 confirms, to date, there is no evidence of aerosolization in the air with particles that potentially contain the COVID-19 virus, it is recommended, especially in places closed additional use of other protection devices, for example, respiratory masks by FFP2 or FFP3, since aerosols can flow behind the visor.
 
KEY FEATURES
Use temperature from -40 ° C to + 100 ° C
Good protection against slight impacts.
Good flexibility
UV protection
Wide vision, 160 °
Wide protection area with 250mm x 170mm
Ultralight, 85g PUR foam pad with 35mm thickness
Adjustable elastic cord
Reusable and easily disinfectable
High transparency (light transmission> 89%)
Visual clarity and improved hip quality for less eyestrain
Dimensions according to the recommendations of the "Center for Disease Control and Prevention (CDC)"
  
PLACEMENT AND ADJUSTMENT
Wash your hands with soap and water and then dry them. Place the visor over your face and eyes, without touching the inside, so that the foam pad sits comfortably at the level of your forehead, just above the eyes. Adjust the length of the elastic cord if necessary.

DISASSEMBLY AND DISINFECTION
Wash your hands with soap and water and then dry them. Remove the face shield by handling only the elastic cord, as it is considered "clean". Hands or face should never touch the front, inside, and sides of the device, as these are the surfaces most likely to be contaminated by aerosols, splashes, splashes, or drops. Put the face shield in a container and wash it with mild soap and water, then disinfect it with 70º alcohol. Let it air dry. Wash your hands with soap and water and then dry them.

IMPORTANT NOTE: Preferably gloves should be worn when removing, cleaning and disinfecting this device. If you are not wearing gloves and your hands become contaminated while removing the face shield, wash your hands immediately or use an alcohol-based hand sanitizer. Always wash your hands at the end of the whole process.